7 Commits
Author SHA1 Message Date
bvandeusenandClaude Opus 5.5 24700ee608 feat(settings): Settings brought into line with the rest of Steward (milestone 493)
CI / lint (push) Successful in 2s
CI / integration (push) Successful in 56s
CI / unit (push) Successful in 1m24s
CI / publish (push) Successful in 1m9s
The last page of #5214's walk. Settings still described Steward as it was
before monitors were unified and SNMP was rebuilt, drew its tabs below the
breadcrumb, and showed the report schedule in UTC.

- Tabs (#5377): settings/_tabs.html is a settings_tabs() macro called in
  each page's section_tabs block, above the trail, as Ansible's are. The
  breadcrumb guard also fails any page that {% include %}s a tab strip.
- Report time (#5378): reports.schedule_tz keeps the zone of whoever saved
  the schedule; check_and_send compares in it (report_due), and the form shows
  the day and hour on the reader's clock (schedule_in) under their zone's
  name. "Last sent" uses |when.
- Wording (#5379): the report contents list what the report holds (monitors,
  not ping-enabled hosts); "Ping latency" is "Response time" and says what it
  grades; plugin detail says enabling loads now and disabling needs a
  restart; the monitor interval says it applies on the next check (the
  scheduler reads it every pass); the dead list-config branch is gone.
- Traefik (#5380): the 5xx and 4xx cutoffs are settings
  (traefik.threshold.error_5xx_pct 0.1, error_4xx_pct 1.0) in a "Traefik
  routers" group on Thresholds while the plugin runs, read by router_state
  through error_cutoffs(). The Traefik page has a Thresholds button for
  admins, to /settings/thresholds/#traefik.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-08 13:28:43 -04:00
bvandeusenandClaude Opus 5.5 98854d94f9 feat(platform): tini as PID 1, Hypercorn, a log-level setting, the image on CI's Python, an airgapped boot gate before push (#5159)
CI / lint (push) Successful in 4s
CI / integration (push) Successful in 1m11s
CI / unit (push) Successful in 1m31s
CI / publish (push) Successful in 2m34s
- Dockerfile: python:3.14-slim, the Python CI tests on (was 3.13). tini from
  apt is PID 1 (ENTRYPOINT tini -- entrypoint.sh): it reaps the zombies ssh
  and ansible leave and forwards SIGTERM.
- cli: Hypercorn's serve() with one worker (run, stream and scheduler state is
  in-process), a 10 s graceful timeout, and SIGTERM/SIGINT as the shutdown
  trigger. Access and error lines go through Steward's logging. --debug keeps
  Quart's reloading dev server.
- Logging: steward/core/logging_setup.py installs one root handler before
  anything logs (until now a library's basicConfig on import was the only
  configuration). Its level is the `log.level` setting (DEBUG/INFO/WARNING/
  ERROR, default INFO), applied at boot and on save in Settings → General.
- CI publish: build, then "The image boots with no internet" (rule 164,
  snippet #3552), then push, so a broken image never reaches a tag (rule 177).
  On an --internal network with its own Postgres, the image must migrate and
  answer /health, run tini as PID 1, serve first-run setup with its assets
  from /static and no third-party host, and exit 0 on SIGTERM. Logs and
  clean-up run always.

Tests: tests/core/test_logging_setup.py; the smoke step itself.
Not in this commit: the dependency lockfile (it conflicts with rule 154 and
is waiting on the operator).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-06 21:29:21 -04:00
bvandeusenandClaude Opus 5.5 9fdd67a675 feat(retention): every growing table is pruned; the audit log has its own window; charts read the raw window from Settings (#5155)
CI / lint (push) Successful in 2s
CI / integration (push) Successful in 47s
CI / unit (push) Successful in 1m10s
CI / publish (push) Successful in 55s
- prune_by_age(column) registers a time-series column with the hourly cleanup;
  Traefik (metrics, access summaries, global stats) and UniFi (WAN, client,
  WLAN, DPI, events, alarms, speedtests) register theirs in setup().
- Alert events join monitor results and Ansible runs on data.retention_days,
  read from Settings each run; Ansible run log files older than it are deleted.
- audit.retention_days (365) keeps the audit log longer, set on Settings > General.
- metric_series.points reads metrics.retention.raw_days, so the chart's
  raw/rollup seam is where the rollup put it (RAW_DAYS removed).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-06 21:05:22 -04:00
bvandeusenandClaude Opus 5.5 e864cd4b6c feat(ui): share view on steward.css; breadcrumbs everywhere they belong; focus ring; tables scroll in their card (#5095)
#5095 "Share view on the shared stylesheet; breadcrumbs, focus-visible and
wide tables".

- dashboard/share_view.html loads theme.css and steward.css; its own copy of
  the old purple palette is gone. Only the read-only frame and the x/y/w/h
  grid stay inline, written in tokens. HEX_CEILING 75 -> 58.
- Breadcrumbs on settings/general, settings/thresholds, the dashboard share
  page and share-link-created. tests/test_breadcrumbs.py fails on any page
  extending base.html without a crumbs() trail, unless it is on the named
  list of section top pages, logged-out and error pages (rule 134).
- :focus-visible draws --fs-focus-ring on links, buttons, summaries, inputs
  and anything with tabindex.
- Any card holding a .table scrolls sideways (card:has(table.table)), so a
  wide table no longer widens the page at phone width; .card-flush scrolls
  too, main gets min-width:0, and .table-wrap covers a table outside a card.
- tests/test_share_view.py renders the share view: shared sheets, no hex
  colour, escaped name, widgets loading through the share token.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-06 14:37:39 -04:00
bvandeusenandClaude Opus 5.5 7a3f7869fe feat(auth): sessions end when they should; logins are throttled; Secure behind HTTPS (#5035)
CI / lint (push) Failing after 2s
CI / integration (push) Failing after 47s
CI / unit (push) Successful in 1m5s
CI / publish (push) Skipped
#5035 "Sessions: lifetime applied, role and is_active re-read per request,
logout is a POST, failed logins throttled".

- steward/core/proxy.py: trusted_value / is_https / client_ip read
  X-Forwarded-Proto and -For only as far as the trusted proxy hops
  (Settings → General, default 1, 0 = trust none).
- The session cookie is Secure, and HSTS is sent, only on requests that
  arrived over HTTPS by that rule; plain-HTTP and LAN use are unchanged
  and nothing redirects.
- A login lasts Settings → General's session lifetime from when it began
  (session.permanent + a login_at stamp checked every request — the
  cookie's own age slides on every response). A deleted or deactivated
  user is logged out on their next request; a role change applies at once.
- Logout is a POST (a form in the sidebar); GET /logout is gone.
- Failed logins pause an address after login.max_failures within
  login.lockout_minutes (Settings → General; defaults 5 in 15 min),
  keyed by address so nobody can lock a user out by name. Failures are
  audited as auth.login_failed with the address.
- to_access_cfg projects the new settings into app.config at startup and
  on save, beside the existing projections.
- Integration tests seed real users and a login_at, since every request
  now re-reads the session's user.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-06 11:02:27 -04:00
bvandeusenandClaude Opus 5.5 96126b1c83 feat(auth): forged browser requests are refused (#5031)
CI / lint (push) Successful in 2s
CI / integration (push) Successful in 49s
CI / unit (push) Successful in 1m3s
CI / publish (push) Successful in 1m18s
#5031 "Forged-request protection: SameSite cookie, per-session CSRF token
on every non-GET, HTMX header". A page on another site could make a
logged-in browser POST to Steward with the session cookie attached.

- steward/auth/csrf.py: a per-session token, checked in one before_request
  for every POST/PUT/PATCH/DELETE (header X-CSRF-Token or form field
  csrf_token, constant-time compare). The bearer-authenticated host-agent
  ingest is exempt; /mcp never reaches Quart.
- Every POST form renders {{ csrf_field() }}; base.html carries the token
  in a meta tag and adds it to every HTMX request; the dashboard's fetch()
  calls send it.
- The session cookie is SameSite=Lax; login issues a fresh token.
- PUBLIC_BASE_URL is now loaded from Settings at startup (it was only set
  when Settings → General was saved).
- tests/test_csrf.py: refusal, acceptance, rotation, the ingest exemption,
  and a guard that every POST form in the templates carries the field.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-06 10:44:19 -04:00
bvandeusenandClaude Opus 4.7 88ab5b917e chore: rename project Roundtable → Steward
Renames the Python package directory, CLI command, env var prefix,
docker-compose service/container/image, Postgres role/db, and all
visible branding. Marketing form is "Fabled Steward".

Clean break from the previous rebrand: drops the fabledscryer→roundtable
import shim in __init__.py and the FABLEDSCRYER_* env var fallback in
config.py and migrations/env.py. Env vars are now STEWARD_* only.

Heads-up for existing deployments:
- Postgres user/db renamed fabledscryer → steward in docker-compose.yml.
  Existing volumes need the role/db renamed inside Postgres, or override
  POSTGRES_USER/POSTGRES_DB to keep the old names.
- Host-agent systemd unit is now steward-agent.service. Existing agents
  keep running under the old name; reinstall to switch.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
2026-04-25 16:20:14 -04:00