Two 500s of about sixteen requests graded roundtable@swarm critical at
9.1%. The Settings → Thresholds minimum of requests in 15 minutes (30 by
default) now guards both shares; the 5xx share still keeps its fixed
cutoff whatever the router's history.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Through one address Steward read whichever replica answered, and with
host-mode ports behind a keepalived VIP that can be the replica serving
nothing: since the 18:43 restart every scrape landed on Docker03's idle
Traefik, which has no traefik_service_* series, so no router was stored.
A metrics_url host name that resolves to several addresses (a swarm
service's tasks.<service>, a Kubernetes headless Service, round-robin DNS)
is now scraped address by address, with the original Host header and TLS
name. Answers from one process are kept once; a replica that doesn't answer
is skipped with a warning. Requests, bytes and latency buckets are summed
over the replicas that have a baseline, so the sum's rise is the sum of each
one's own rise; certificates are listed once; Traefik's own figures add
connections and memory and keep the newest reload. A name with one address
is one scrape, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
One metrics URL can reach several Traefik processes: a swarm service's
replicas behind the routing mesh or its VIP, a Kubernetes Service's pods,
a keepalived pair after failover, or the same Traefik after a restart.
Each keeps its own counters, so comparing one with another read the second
one's lifetime totals as new traffic: retired routers flashed 100% 502 and
an idle router showed 834 req/s whenever the scrape moved to the other
replica.
Each scrape is now keyed by Traefik's process_start_time_seconds and
compared only with the same process's previous scrape. A process seen for
the first time (or not in the last hour) sets its baseline and counts
nothing. Without a start time every scrape is one process, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The snmp plugin registers list_snmp_devices and get_snmp_device; the
prometheus plugin registers list_prometheus_targets and
get_prometheus_target. Both are viewer-level, read what the poller and
scraper stored, and exist only while their plugin is enabled.
get_overview names a device or target whose last poll or scrape failed;
stale, pending and off are left out.
A device's community and v3 keys and a target's token are never
returned, and a password in a target URL is masked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
get_network gives the WAN, clients, Wi-Fi networks, speed tests and devices
by status; list_devices, list_clients (everyone seen, or the newest poll's
top talkers), list_network_events, list_alarms and get_network_config
(networks, port forwards, firewall rules) read what the poller stored.
get_overview names the WAN down while the poll is current, a device offline
or degraded that the controller still reports, and active alarms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
list_routers grades every router as the Traefik page does (the last 15
minutes, 5xx on its cutoff, 4xx and p95 against the router's normal) and
gives a troubled one its status codes, what they mean and the swarm
service behind it. get_router adds its history, codes, normal and
anomalies; list_certificates the served certificates and the routers they
cover; get_traffic the access log's clients, countries and routers.
get_overview names a router answering 5xx and a certificate near expiry.
The access-log aggregation moves into routes.summarize_access, shared by
the traffic page and get_traffic.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5835 "MCP: swarm nodes", step 2 of milestone 520. list_swarm_services
already listed every node (role, leader, availability, status); the
audit missed it. What was missing:
- Each node row carries `host_id` (the Steward host of that name) and
`maintenance` (the state of a maintenance job running on it), so an
agent can go node -> get_host / get_maintenance_job.
- get_overview names a node whose status isn't ready, unless its host
has a maintenance job running (rebooting on purpose).
- Drained alone is not a finding: VDNT-Util01 is a manager kept drained
on purpose (#5777), and a drain a failed job left behind is already
that job's maintenance_failed finding.
unique_nodes() keeps the newest report of each node, as the list did.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5834 "The host agent is always on, and the MCP sees a host's
maintenance", step 1 of milestone 520 "The MCP sees what Steward has
grown".
The host agent is a core system (operator, 2026-10-15: "it's very core
to the functionality of Steward as a whole and shouldn't be considered
something that can be toggled off"). ALWAYS_ON_PLUGINS in core settings
makes to_plugins_cfg report it enabled whatever its stored row says, so
it always loads and its MCP tools are always listed. Settings -> Plugins
shows it as "Built in: always on" with no switch, and a save keeps it
enabled. Its code and URLs stay under plugins/host_agent: every
installed agent posts to /plugins/host_agent/ingest.
Maintenance through the MCP:
- list_maintenance_plans: each plan's group, weekly slot, reboot policy,
next slot, and its latest run (hosts, how far it got, who it skipped
and why, how it ended).
- get_maintenance_job(host | job): a host's jobs, newest and running
first, or one job: state, packages updated, reboot, drained by, why it
failed, when its current state times out.
- run_maintenance(host, reboot="if_required" | "never"): admin, as the
host page's Update now; refuses a busy host or one with no helper;
audited "<user> via MCP".
- The overview names a host whose latest job in the last week failed or
timed out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Agent 1.21.0. The hourly update check now covers the package managers
beyond apt and dnf (#5803 "The agent's update check reads pacman,
zypper and yum"):
- yum: `yum -C check-update`, `updateinfo list security`,
`needs-restarting -r`, as dnf.
- zypper: `--no-refresh list-updates` (`--dup` on Tumbleweed),
needed security patches from `list-patches --category security`,
and `zypper needs-rebooting`.
- pacman: `checkupdates` from pacman-contrib, which install-deps.sh now
installs. pacman has no security notion; a reboot is required once
the running kernel's /usr/lib/modules/<release> is gone.
The checks sit in one UPDATE_CHECKS table, and a failure names its
manager.
The root helper's update runs on the same hosts (#5804 "The scheduled
update runs on pacman, zypper and yum hosts"): yum upgrade, zypper
refresh + update (dup on Tumbleweed, with 102/103 counted as success),
pacman -Syu. Each step carries a label so a failure says which one,
and the reboot check reads zypper and the pacman kernel too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Overview: a verdict line when something is wrong ('1 alert firing, 1
monitor down.'); its picker description now says what it lists (alerts,
monitors down, anomalies). Host figures have their home in Hosts.
Comments no longer name the Status page that was folded into Monitors.
- Monitors widget: a monitor not checked yet says when it was added.
- Host page: filesystems fullest first, by the worse of space and inodes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Its problems and since come from the same container_problems and
problem_since the Docker page uses, read from the day's deaths and
health changes; troubled containers sort worst problem first, then name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Routers: a router in trouble reads 'started 2h ago' or 'all of the last
24 h', from problem_since over the day's history, read for the troubled
routers only (a certificate's problem carries its own date). Hosts: a
down host reads 'a monitor is down for 3h'; host_glance keeps the
down_since host_status already had.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
smartctl reports every disk behind a PERC/MegaRAID controller as /dev/bus/0
with type megaraid,N; the helper named a drive by its path alone, so all of
VDNT-Docker02's and Docker03's disks read as one drive "0", each overwriting
the last. The slot is now part of the name (bus0-megaraid3), and Steward gives
a repeated name an ordinal so two drives never share a series. Agent 1.20.1.
fix(ansible): Steward stopping mid-run logs no traceback (#5749)
The run's done-callback called exception() on a cancelled task, which raises;
it now logs a run cut short by shutdown at INFO. A finished run's in-memory
state is dropped by a timer rather than a sleeping task, which shutdown found
still pending.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The root helper gains one read-only action, `drives`: it finds the drives
itself (smartctl --scan-open), reads each as JSON, and writes a summary the
agent carries on every sample (agent 1.20.0). Steward judges the figures in
drives.py (failing / worn / watch / ok / no SMART / unreadable), records them
per drive and as host roll-ups for covering rules, keeps the newest report on
the registration and lists it on the host page.
install-deps.sh installs smartmontools with apt, dnf, yum, zypper, pacman or
apk, run by install.sh and every agent playbook; one it can't install is
reported, never fatal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On 2026-10-14 nine swarm services sat at 0/1 and nothing fired. From each
manager's swarm report the docker plugin now records three figures on
resource "swarm": swarm_services_short, swarm_nodes_down and
swarm_managers_unreachable. Drained nodes are left out of the last two,
since a drain is deliberate. The figures are recorded at most once every
30 s whichever manager reported, and are offered to alert rules.
Agent 1.19.0 sends each manager's ManagerStatus.Reachability. Older agents
fall back to the node's status.
A maintenance job on a swarm node also keeps a window over docker/swarm,
so its drain and reboot hold those alerts until the job ends.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On the live instance the hourly refresh took 3 min 8 s, averaging a week of
raw temp_c samples each time. The hourly averages are now kept in memory.
The first refresh after startup reads the whole window. Each later one reads
raw samples from the start of the hour the last read ended in, so the hour
that was still filling is read again whole. merge_hours folds the new rows
in and drops hours older than the window.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A board's spare thermistor inputs report whatever an open input reads, and
the value rule from #5759 only catches the impossible ones. Once an hour,
sensors.refresh judges each sensor against the host's CPU (Package id N,
Tctl/Tdie/TccdN, PECI Agent N) over a week of hourly averages. A sensor is
ruled out if it falls as the CPU warms (r <= -0.5) or holds within 0.5 °C
while the CPU moved 10 °C or more. A judgment needs at least 72 shared hours.
The host temperature leaves judged sensors out at ingest. The host page
lists them under "Not counted", with each reason given once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- #5780 "The error-pages service is graded on other routers' errors". The
Traefik scrape reads which services an errors middleware sends to, and
grades them healthy: their 4xx and 5xx are the codes of the errors they
cover for, already graded on the routers that failed.
- #5781 "The Maintenance failed rules sit at no data until a host has had
a maintenance job". Every host with an agent reads 0 until a job fails.
- #5782 "VDNT-Util01's host page lists SYSTIN at 115 °C in red". The host
page lists sensors that counts_as_hottest leaves out (unwired board
inputs, 0 °C or below) on one muted line, not as heat.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5712 "Each router problem says what it means, whether it's real, and what
to do". A problem card now names its kind and reads its codes:
- Server errors: 500 means the app is failing; 502/503/504 means Traefik
couldn't reach it or it timed out.
- Client errors: 404 scanners, a 401/403 login wall, 429 rate limiting, or
499 clients giving up on a slow app.
- Slow: p95 against p50.
Each card says whether the problem is likely real, and ends with one next
step. A fault links to the swarm service behind the router, matched by
name, and traffic links to Settings → Thresholds. The wording lives in
plugins/traefik/meaning.py.
The plugin manager now hands out a loaded plugin's submodule
(loaded_plugin_submodule), so Traefik and host_agent reach Docker's
models the same way (#5775).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5777 "Maintenance would make a node the operator keeps drained active after
its reboot". A swarm node already set to drain or pause, such as a manager
kept free of work, is no longer drained before its reboot or made active
after it. Its job only updates and reboots it, and back-in-service needs it
ready but not active.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5768 "A maintenance cadence: a group's updates and reboots, one host at a
time, on a schedule". A plan names an inventory group, a weekday and time
in a time zone, a window and a reboot policy (only when required by
default). At its slot a run takes the group's hosts in order and gives each
a #5767 maintenance job. The next host starts only when the last is back in
service: its agent is posting and, for a swarm node, the node is active and
every replicated service is at its replicas. A failure stops the run, and
no host is started once the window has passed. A host's latest failure
shows as host_agent/<host>/maintenance_failed, for an ordinary alert rule.
The page is Hosts → Maintenance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5767 "Steward hands a host a maintenance job and follows it to the end,
through its own restarts", milestone 514.
A host_maintenance_jobs row per job: queued → updating → [draining →]
rebooting → [undraining →] done, or failed / timed_out. Steward's answer to
an ingest post carries the step that host's agent should carry out now; the
agent (1.18.0) leaves each step id for the root helper once, and the helper
refuses an id it already ran, so repeats are harmless. Results come back as
the #5766 maintenance events, matched by step id; the reboot completes when
the host's `started` event has a boot_at after the reboot was handed out.
The job reboots only when the update says one is needed (or never, if asked).
A swarm node is drained first by itself if it's a manager or by a manager
with the helper, and made active after; with no manager to drain it the job
is refused. A minute tick times out a job past its state's deadline. A
maintenance window over host_agent/<host> lasts the rest of the job.
Everything is on the row, so a Steward restart, or the reboot of the host
Steward runs on, resumes from the next post. Ingest runs it in its own
savepoint so a job going wrong never costs the samples.
The Agent panel leads with a running job and says what a finished one did;
Manage agent has Update now (with "never reboot"), or says why a job can't
start. Integration test: hand off, Steward restarts, the post-boot events
close the job.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5766 "A root helper the agent can start, for a fixed set of maintenance
actions and nothing else", milestone 514.
The agent runs unprivileged under NoNewPrivileges, so it can't update or
reboot its host. It now leaves a request in /var/lib/steward-agent/requests,
the one path its unit lets it write; steward-maint.path starts maint.py as
root, which reads it without following links, accepts only update, reboot,
drain or undrain, deletes it, and writes the outcome to
/var/lib/steward-maint/results. The agent (1.17.0) reports each new result
state once as a `maintenance` event, re-checks pending updates when an update
finishes, and says in its metadata whether the helper is installed.
The units and the helper are served from one copy at
/plugins/host_agent/files/<name> (a fixed list), and install.sh plus the
install, provision and update playbooks all fetch them, replacing three
inline copies of the unit. Update agent installs the helper on existing
hosts; the Agent panel says under Manage agent whether it is there.
Steward handing out jobs is #5767; the cadence is #5768.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Step 1 of milestone 514 "Updates and reboots on a cadence, carried out by
each host's agent…": #5765 "The agent reports pending updates and whether
a reboot is required".
- Agent 1.16.0: an hourly background check (apt-check, apt list, or dnf -C
with updateinfo and needs-restarting), each command bounded at 120 s, no
root and no network. Debian's reboot-required marker and its packages
are read every sample.
- Ingest records updates_pending, updates_security and reboot_required for
rules, and keeps the newest on the registration (host_agent_005_updates).
- The Agent card leads with "Reboot required since …", then the updates
waiting or "Up to date", with when the check ran. list_agents carries
them too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5764 "The agent reads a container's whole log backlog into memory, on its
main loop, with no overall deadline". Docker03's 1.13.0 agent went silent
for a day at 2.1 GB and 46 h of CPU, then ignored SIGTERM.
- One shared reader, _docker_get: each answer has an overall deadline and a
byte cap, not only a per-recv timeout. A trickling or endless body is cut
off (15 s / 32 MiB for JSON, 5 s / 4 MiB for a log read).
- Container logs: since the cursor but only the newest 2,000 lines, all
within 10 s. A note says when older lines were skipped, and a container
whose answer is too big skips ahead to now instead of re-reading its
backlog every interval.
- The agent reports its own RSS and CPU; Steward records agent_rss_bytes
and agent_cpu_pct, so a runaway agent shows before it goes silent.
Agent 1.15.0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5759 "VDNT-Util01 reads 114 °C: its "hottest sensor" is a Super-I/O input
with nothing wired to it". b3885c3 left out AUXTIN*, but Util01's SYSTIN
reads 114 °C too, so temp_c_max stayed at 114. A board's Super-I/O inputs
(SYSTIN, CPUTIN, AUXTIN*, PCH_*) now count only below 100 °C: a wired one
reads the board, far below that, and still counts on other boards.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5760 "One stalled NFS mount freezes the whole agent: statvfs has no
deadline, so the host goes silent while it still answers ping". The agent
read every mount inline in its only loop; a hard-mounted share whose server
stops blocks statvfs in the kernel with no timeout. Each mount is now read
in a daemon thread under one 5 s deadline. One that misses it is sent as
stalled, and isn't probed again while its last probe is still blocked. A
mount that errors (a stale handle) is left out instead of emptying the list.
Steward counts them as mounts_stalled (alertable: "an NFS share stopped"),
and skips the fullest-disk figure when every mount stalled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5759 "VDNT-Util01 reads 114 °C: its "hottest sensor" is a Super-I/O input
with nothing wired to it". AUXTIN0/1 on the board's Nuvoton chip read
110-112 °C flat at every load while the CPU package moved 49-87, so
temp_c_max read critical all week. The max now counts only readings that
can be real: not an AUXTIN input, above 0 and below 125 °C. Each sensor
keeps its own temp_c row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5756 "The agent says when its host rebooted and when it lost contact, so
downtime is recorded as what it was". Agent 1.14.0 posts events with the
next post that gets through: started (with the host's boot time), stopping
(on SIGTERM, with whether systemd says the host is going down) and
lost_contact (from its first unanswered post to the one carrying it).
Steward keeps them as the host's downtime (host_downtime): reboot,
agent_stop, unclean (a boot after the agent was last heard that nobody
announced) or lost_contact. Retried posts apply once.
An announced stop explains the silence for reboot_grace_seconds (Settings
-> Plugins -> host_agent, 10 minutes): seconds_since_seen reads 0 until
then, and the host's other rules go quiet with it (agents_away beside
#5721's registry). Past the grace, agent offline fires.
The host's Agent card lists the last 7 days of downtime. Rows are pruned
at data.retention_days.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
VDNT-Util01's / ran out of inodes (956 free of 60.8M) with 274G of space
left; every file create failed and Steward's page read healthy at 66%.
- Agent 1.13.0 reports each mount's inodes (statvfs; a filesystem reporting
none, like btrfs, is left without).
- Ingest records inodes_used_pct per mount, and disk_used_pct_worst is the
fullest mount by space or inodes, so existing disk-full rules and the
overview see it.
- The host's health strip, the Hosts widget and the host glance grade / by
whichever is fuller and name inodes when they are ("Disk / 66% · inodes
100%", "Inodes on / ... past its critical threshold").
Hosts pick up the inode figures once their agent is updated to 1.13.0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Nine services that lost tasks in one node's bad three minutes stayed on the
overview as warnings for a day, 17 hours after they recovered. Against the
UI ruling (only what is current on the dashboard), a service running all its
replicas is now history: its failed tasks stay on the Docker page, not on
the overview or the dashboard's failed count. Services still short of
replicas that started failing within five minutes of each other read as one
finding naming them, dated from the first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Counting every agent's silence from when Steward started watching again
(#5441) read an agent that was already gone as just seen: its agent-offline
alert resolved at 0 s and fired again three minutes later, two false emails
per restart (VDNT-Docker03, four times in a day). An agent whose last
recorded seconds_since_seen was already past the offline window now keeps
counting its whole silence; one that was fine when Steward stopped still
counts from the restart, so Steward's own downtime still fires nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5741 "Traefik routers are graded against their own normal", milestone 513.
- A router's 4xx share and p95 learn their normal (learn_normal in the
plugin's setup). Once a router has 5 days of history, a reading over the
fixed cutoff but inside its normal is healthy, and the healthy table says
it is usual for that router. One out of its normal is a warning that says
what is usual, and a metric anomaly.
- The 5xx share is a failure: fixed cutoff always, whatever the history or
traffic (System 182's ruling).
- A 4xx share over fewer requests than Settings -> Thresholds' new "Fewest
requests to judge 4xx" (30 per 15 minutes) isn't graded on the page, and
isn't judged for anomalies.
- Core: learn_normal(gate=(metric, least)) judges a key only while its
resource's gate metric averages at least `least`; `least` may be a
function, so it follows a setting. learn_normal(since=...) learns only
from history after a moment: Traefik latency learns from #5755's
per-scrape figures only.
- The Traefik page lists the routers' metric anomalies of the last 30 days
(_anomaly_card.html). The dashboard widget keeps its why to problems.
- Thresholds and docs say when the cutoffs give way to a normal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5755 "Traefik latency was a percentile of every response since Traefik
started, over unsummed label sets". _percentile_ms read the duration
histogram as it stood, which counts from Traefik's start, so p50/p95/p99 were
lifetime figures that barely moved. It also walked every code/method label
set's buckets as one unsummed list, so equal counts from two sets returned
an edge exactly: nextcloud's flat 100.0 ms p95.
service_buckets() now takes each bucket's rise since the previous scrape,
summed per le over every label set. A scrape with no responses, and the
first scrape, record no latency: traefik_007_latency_nullable lets the
columns be NULL, the batch skips the figure, and the page shows "—".
Found while preparing #5741 "Traefik routers are graded against their own
normal", which grades p95 against a learned normal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5752 "Container CPU and memory history lives in the one metric store;
docker_metrics and docker_metrics_hourly are retired". Container cpu_pct and
mem_pct already went to plugin_metrics for alerting; now mem_usage_bytes does
too, and every snapshot in an ingest (backlog included) is recorded at its
own time. The container history chart, Busiest Containers, a service's
history and the MCP container tools read plugin_metrics under resource
"<host>/<container>", rolled up and pruned by the shared metric retention.
docker_012_drop_metrics drops both tables. Their history is not copied
(lesson #5221 "A data migration's cost is set by the live table"); the
store already holds 7 days of container CPU and memory %. Docker retention
now prunes only lifecycle events, and Settings -> Thresholds has one
"Metric retention" card for every source.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The scraper folded traefik_service_requests_total{code} into two shares and
dropped the code, so a problem couldn't say whether it was scanners (404), a
login wall (401/403) or the app down (502/503/504). Each scrape now stores the
responses per router and code that occurred (traefik_status_codes, migration
traefik_006), pruned with the router metrics and left out of backups (System
180 ruling: Traefik history is not backed up). A problem card lists its codes
over the last 15 minutes, most first, or says none occurred, or that codes
aren't recorded yet.
A counter series new since the previous scrape now counts from 0 instead of
being skipped: Traefik creates a router's 502 series at its first 502, so a
first burst of 5xx read as 0% until it happened again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Traefik page now reads state first: a verdict naming each router that
needs a look, why, and when it started (from its history buckets over the
page's range), then the request chart following the page's time range, then
the problem cards (which say since when too), the proxy's own figures, and
the healthy rest. The verdict is filled out of band by /rows each poll; the
"Needs attention" and "Healthy routers" tiles it replaces are gone.
The request chart takes ?range= from the page; past a day its times carry the
day, and its clock is 24-hour (hourCycle h23).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
docs/plugins/prometheus-widgets.md covers:
- where templates live and how to copy one in, duplicate, export and share;
- a first template, walked through;
- each block (states with its deadlines, values, times, table, info) with an
example;
- the format reference: keys, units, spans, limits, what the checker refuses;
- the Fabled Archives template, block by block, with what it leaves out and
why.
Linked from the README, the plugin guide, the editor and template_format.
tests/plugins/prometheus/test_widget_guide.py checks every YAML example in the
guide against the checker, so the guide can't drift from the format.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Read from what Steward stored for Archives on 2026-10-14: the nightly
Restic replication job had said "running" since the first scrape two days
earlier, with no good copy yet and past both its late and missing times.
Archives ranks "running" above lateness, so the widget called it healthy.
- states blocks take warn_past / crit_past: a deadline metric per row (a
*_timestamp_seconds). Once it has passed, a healthy row reads as a
warning or a problem: "FullNightly-Restic is running, 11h 53m overdue".
Quiet and already-failing rows keep their own reading.
- The Archives template (version 2) uses the job's late_at / missing_at
deadlines and shows its last good copy beside the next run. It says why
section_up, the queue and the HTTP/audit counters are left out.
- tests/plugins/prometheus/archives_live.py is the series as captured
live, and test_archives_template.py renders the template over them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Prometheus gains a "Widget templates" tab beside Targets. It lists the
built-in templates and an admin's own, any that no longer pass the checker
first. A template opens as its YAML beside a live preview drawn over a
chosen target exactly as the dashboard widget draws it (routes.draw, now
shared by both). An admin writes or pastes a new one, reads a .yaml upload
into the editor to look over, duplicates any template under a free name,
edits and deletes their own; anyone can export the YAML. Built-in
templates are read-only.
Custom templates are rows in prometheus_widget_templates (migration
prometheus_002_templates), kept in backups, keyed "custom:<id>" so a
rename keeps its widgets. Saving needs a template that passes the checker
and a name no other template has. Create, update and delete are audited
and link to the template.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5691 "Generic Prometheus dashboard widget: pick a target and a template",
step 3 of milestone 508 "Prometheus widget templates".
- /plugins/prometheus/widget draws one target with one template in widget
shape: the verdict (led by "isn't answering" when the target is down),
then each block with problems first, figures beside a share bar or the
last 24h of bars, and the healthy rest folding to "+N more healthy" past
six. A missing target or template, or one that no longer checks, says so.
- library.py: bundled templates from plugins/prometheus/widgets/*.yaml,
the picker's target and template lists, and the default title.
- widgets/fabled_archives.yaml: the first bundled template, against the
series Archives reports (refined in #5693).
- Dashboard: a widget setting may take `options_from` (read when the picker
opens) with an `empty` sentence; `default_title`; a Details link may name
settings ("/plugins/prometheus/targets/{target}"). Prometheus is grouped
with the integrations.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5690 "Widget template format: YAML schema, validator and renderer", step 2
of milestone 508 "Prometheus widget templates".
- template_format.check(text) -> Template, or TemplateError with every
problem, each with its line and what to change. Blocks: states, values
(of -> share and bar, thresholds as numbers or shares, sparkline),
times (warn_after / crit_after), table (two labels pivoted), info.
Anchors/aliases refused, 64 KB cap, YAML's on/off/yes/no flagged.
- template_view.render(template, target, latest, now, history) -> View:
a verdict naming the worst problem, then each block with its problems
first (crit, warn, ok, then quiet states). Missing series show as "—"
and say so; a template whose `expects` prefix the target lacks says so.
- shown_value moves to service.py so the renderer can use it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5689 "Prometheus target page: fold state sets, show epoch times, size
bytes", step 1 of milestone 508 "Prometheus widget templates".
- A state set (name ending in _state, a state label, every series 0 or 1;
or the OpenMetrics form, the label named after the metric) reads as one
row per thing it describes, naming the current state, the others on
hover. fabledarchives_jobs{state} is a count and stays as it is.
- label_pairs / state_label / fold_states in service.py, for the widget
templates to reuse.
- After a good scrape, series it no longer has lose their newest value
(forget_gone): Archives' old build_info row read as current beside the
new one. History stays; a failed scrape forgets nothing; alert rules keep
their own last-sample time.
- Epoch times and _bytes sizes were already read by shown_value /
metric_value.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A bundled prometheus plugin, on by default like the other protocol plugins.
Targets are rows edited on its page: address, bearer token (encrypted),
interval, keep/leave-out name patterns and a series cap. Steward does the
filtering; the endpoint serves everything (Archives' ruling).
- A 5 s tick scrapes due targets at once, each within a 30 s deadline, and
writes the outcome to its row and its series through record_metrics, so
alert rules can watch any of them.
- Gauges are stored as they are; counters (and a histogram's or summary's
_sum/_count) as <name>_per_sec rates from the second scrape. Buckets and
quantiles are skipped. A labelled series is stored under
"<target>:k=v,…". Each target also records is_up, scrape_ms, series_kept
and series_capped.
- Pages: targets not answering first, with why; a target's series grouped
by metric with their newest values; a chart per series; the editor with
Test, which scrapes once and says what would be stored.
- The counter-to-rate keeper moves to steward/core/counter_rates.py; SNMP's
RateKeeper now scales its rate on top of it.
- metric_value reads Prometheus's _seconds as a span and _per_sec as a rate.
- The catalog guard treats an empty list as a dynamic source (snmp,
prometheus), as the rule form does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
At 20:25-20:39Z the NFS storage under steward_db slowed badly (checkpoint
sync 4.6 s, then 70.7 s with one file at 21.9 s, against the usual 0.002 s).
Ingest commits stalled past the agent's 10 s timeout and were dropped, and
last_seen_at, written in that same transaction, went with them. Agents
posting every few seconds read as silent for 3 minutes, and "Agent offline"
fired and emailed for all three hosts.
Ingest now notes each agent's arrival in memory right after the (read-only)
registration lookup, before any write; seconds_since_seen counts from the
later of last_seen_at and that arrival.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After Steward or its database was down, every agent's age and every
series' last sample were old, so all agent-offline rules fired and all
rules went no-data at once, clearing a minute later. With per-account
alert email that would have mailed everyone a dozen notices per restart.
A periodic job now ticks a Watch (steward/core/watch.py) once it has
reached the database; the Watch says since when runs have been unbroken
(process start, or the end of a gap over 120 s). seconds_since_seen and
the no-data sweep count silence from no earlier than that, so a source
must stay quiet while Steward is watching before it counts as silent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#5207 "UniFi Overview tab: func.strftime is SQLite-only": the WAN and
client sparklines bucketed with strftime('%s'), which Postgres lacks, so
/plugins/unifi/rows failed. Traefik's date_bin bucket moves to
core/time_range.time_bucket and both plugins use it. Devices list offline
and failing first, and a state other than online is named (Upgrading,
Adopting, Heartbeat missed...) instead of drawn as Down.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
