b7e648226bf6d0a8f835d276a15fcdf50b32ddd4
7
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
0e10f6bb8a |
feat(rules)!: retire the always-on tier — every rule arrives by retrieval (#394)
CI & Build / Python lint (push) Failing after 3s
CI & Build / Plugin hooks (push) Failing after 12s
CI & Build / integration (push) Failing after 27s
CI & Build / TypeScript typecheck (push) Failing after 35s
CI & Build / Python tests (push) Failing after 37s
CI & Build / Build & push image (push) Skipped
Milestone 394, steps 5-8. Operator: "remove the always on rule functionality as the goal was to not have it at all since it didn't seem to work as expected." Unconditional preload had three failures the retrieval arms do not. It could not be MEASURED — a resident rule is in the context whether or not it mattered, so nothing distinguished "this governed the act" from "this was scenery", and it was the one surface structurally exempt from the scoreboard judging every other. It was SUMMARISED AWAY by compaction while the session went on believing it held the rules. And it CROWDED OUT the few rules that applied with the thirty that did not. WHAT GOES Schema (0100): rules.tier + ck_rules_tier, rule_versions.tier, rulebooks.always_on, and project_rulebook_exclusions — a table recording a project's opt-out of something that no longer binds it unasked. Tools: list_always_on_rules, exclude_always_on_rulebook, include_always_on_rulebook. Service: the same three plus rules_etag_for, _valid_tier and the whole etag family. The SessionStart preload and the write-path staleness arm go with them: nothing is resident, so nothing can have drifted since a session loaded it. THREE CALLS WORTH REVIEWING enter_project got NARROWER, not wider. Its filter was `always_on OR area-tagged`; dropping the tier arm leaves the deterministic half, so a project with no canonical-tagged Systems gets no bulk rules and reaches them by retrieval instead. Dropping the whole clause would have made that payload bigger than the preload this milestone deletes. Backups import tolerantly. A pre-394 archive carries tier, always_on and the retired inception choice; none is read, and the exclusion key is DROPPED rather than remapped, because restoring it would write data that validate_inception now rejects as unknown. The migration is irreversible in the way that matters and says so: downgrade recreates the columns at their defaults and cannot restore which rules were always-on. A value invented to fill a hole is not a measurement. THE INSTRUCTION SURFACES SAY THE HARDER THING Deleting "call list_always_on_rules()" is easy; replacing it is not, because the new model asks a session to trust something it cannot see. All three surfaces now say a session holds nothing, that rules arrive when work matches them, and — the half that got dangerous — that "no rule arrived" means "nothing matched", never "there is no rule". Under residency an empty session was rare and suspicious; it is now the ordinary state of most turns, so reading it as permission is wrong on nearly every turn rather than occasionally. That is #3720's defect at session scale. test_instruction_surfaces_agree is repointed rather than retired: its two halves collapsed into one instruction, and it gains a guard that every surface states what absence means. _INSTRUCTIONS is back at 1999/2000 — the inception clause paid for the longer HOW line. UI (rule 27, and the opportunity step 8 named) The tier selector is gone, and what replaces it is the point: `when_to_apply` is now the field that decides whether a rule is ever seen, so the editor marks it required, warns while it is empty, and both rule lists badge a trigger-less rule "never surfaces". A rule without one is not quiet, it is unreachable. TESTS Two files deleted outright — test_rules_etag.py and test_inception_rules.py tested subsystems that no longer exist. Elsewhere obsolete cases were removed and the rest repointed. One deserves naming: the wiring test asserted the act arms pass no `tier`, which had become an assertion that could not fail. It is repointed onto `kind`, which does still exist and where the same claim is live — a preference must reach a write exactly as a rule does. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_011cPyzNnegXHr5iRMzzy5KJ |
||
|
|
a8b2040216 |
feat(rules): the edit history is visible in the slide-over (#3243, milestone 323 step 4)
CI & Build / Python lint (push) Successful in 5s
CI & Build / Plugin hooks (push) Successful in 9s
CI & Build / TypeScript typecheck (push) Successful in 34s
CI & Build / integration (push) Successful in 35s
CI & Build / Python tests (push) Successful in 1m20s
CI & Build / Build & push image (push) Successful in 40s
Rule 27: a history nobody can read is not shipped. `RuleHistoryPanel.vue` sits below the fields in `RuleEditorSlideOver`, where a rule is read in full — not on the list row, where a history entry point would compete with the row's job. REUSE, DECIDED FIELD BY FIELD RATHER THAN ALL AT ONCE. DiffView.vue is reused unchanged: it takes DiffLine[] and nothing note-shaped. HistoryPanel.vue is NOT, and its props are the reason — noteId + currentBody, a NoteVersion carrying tags and pin columns, a fetch of /api/notes/…, a restore emit, pin/unpin buttons. Rules have no tags, no pins, and deliberately no restore, and a rule's text is EIGHT fields rather than one body, which changes the reader's question from "what changed" to "which fields moved". Recorded here rather than forked silently, per #3207. THE FORK THAT WAS ALREADY THERE. The LCS walk existed three times — privately in useAssist.ts, and again inside HistoryPanel.vue and VersionHistorySection.vue — character-identical apart from quote style, because computeDiff was never exported. Rather than add a fourth copy, it moves to utils/diff.ts and the three become imports; the extraction was verified equivalent to all three before anything was deleted. DiffLine is re-exported from useAssist so its existing importers are untouched. WHAT A ROW SHOWS: when, and which fields moved. A version holds the text the edit REPLACED, so the edit is the step from a row to the next NEWER state — the row above it, or, for the newest row, the rule as it stands now. Comparing against the row below would attribute every change to the wrong edit. A field nobody has fetched yet reads as neither changed nor unchanged. An edit that touched verify_with is badged "check reset", because that edit silently cleared verified_at (milestone 312) and put the rule back at the top of the staleness sweep — a moment visible nowhere else. The badge is a 12% color-mix TINT, not solid `--fs-warning`. `--fs-warning-fg` is defined in theme.css as "warning TEXT on a warning tint", so painting it over the solid token is exactly the same-hue contrast failure #3141 records. Every var() the component references resolves against theme.css, checked before pushing. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
|
c83bedf3be |
feat(rules): the check is editable, visible, and sweepable in the UI (#3098, milestone 312 step 4)
CI & Build / Python lint (push) Successful in 5s
CI & Build / Plugin hooks (push) Successful in 10s
CI & Build / integration (push) Successful in 29s
CI & Build / TypeScript typecheck (push) Successful in 34s
CI & Build / Python tests (push) Successful in 1m13s
CI & Build / Build & push image (push) Successful in 37s
Rule 27 — the milestone was backend-only until this. Four surfaces:
RULE EDITOR — verify_with and expires_when under a legend that asks the
actual question ("Can this rule go stale?") and says empty is the normal
answer, because most rules are decisions and a form that implies a missing
field would get them filled in out of tidiness. When the SAVED rule carries
a check, the stamp shows with Still true / No longer true beside it. The
stamp reads the stored value, not the draft: an unsaved edit to the textarea
has not been run against anything.
SWEEP PANE — its own surface, not a filter on the rule list. That list can
only ever show one topic of one rulebook, and a rule that has gone false
belongs to no one rulebook; filtering it would under-report, which is the
failure this whole surface exists to catch. Reached from the rulebook list,
below the rulebooks, because that is where you go to look at rules.
RULE ROWS — a chip only on rules carrying a check, so its presence is the
signal. PROJECT RULES TAB — the check shows beside `why` when a rule has
one, read-only: that tab is the project's view of what binds it.
NO AGE-GRADED COLOUR anywhere, deliberately. The sweep is already ordered by
urgency, so a red/amber ramp would restate the ordering AND require an
invented "stale after N days" threshold — a magic number nobody could defend
and the first thing to go out of date. --fs-overdue is error red and reserved
for a broken promise like a missed due date; a verification age is not one,
and colouring it that way makes a rule someone just wrote look broken. Only
"never" is marked, because it is categorically different from a date rather
than a worse one — and it is marked by weight, not hue.
An empty sweep says "Nothing to check", not nothing: good news must not read
as a broken page.
Two chips (tier, then verification) turned out byte-identical, so .rule-chip
moves to rules-shared.css and snippet #2906 is updated to match rather than
left describing a file that has moved on. Its header comment counted the
panes it served; that count went stale the moment a fourth arrived, so it no
longer counts.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
|
8b60d552d2 |
feat(rules): the rule editor asks when it applies, and the list shows its age (#3029, milestone 307 step 3, UI)
CI & Build / Python lint (push) Successful in 6s
CI & Build / integration (push) Successful in 38s
CI & Build / Plugin hooks (push) Successful in 15s
CI & Build / TypeScript typecheck (push) Failing after 27s
CI & Build / Python tests (push) Successful in 1m27s
CI & Build / Build & push image (push) Skipped
Rule 27 — the schema and both doors shipped with no human surface, so step 3 was not shippable until this. RuleEditorSlideOver gains the trigger, the tier, the areas, and a read-only view of the rule's edges. The tier is a radio pair carrying the test itself rather than a bare toggle: can you name the trigger WITHOUT naming a system, an artifact type or a moment? If the honest answer is "whenever you are working", it is always on. It also says why conditional is not a demotion — it costs nothing when irrelevant, which is what lets a rule be as long as it needs to be. The relations block states the rule the whole milestone turns on: rules that FAIL TOGETHER are linked, never merged. RuleListPane shows the trigger and the LAST-CHANGED DATE on every row, and marks conditional only — always_on is the default and badging every row would say nothing. The date is the cheap triage the FabledCurator case wanted: a rule whose age predates the capability it duplicates is visible at a glance instead of needing a get_rule to find out. ProjectRulesTab's inline create form gains the same two fields, because a project rule bloats exactly the way a family one does — FabledCurator has 23 of them. Two type fixes the new shapes forced, both worth keeping: - toHeader() in the store: a list row is the server's rule_brief, so patching a list locally has to mirror every field it carries or the two disagree. There were two hand-built four-field literals doing that job. - ApplicableRules.rules / .project_rules are now described AS RuleHeader rather than as two more hand-written shapes — the same builder produces them, so the same type should describe them. groupByRulebookAndTopic skips a null-topic rule rather than widening TopicGroup to accept one: a rule carries topic_id XOR project_id, so a null topic in that list means something is wrong upstream, and a widened type would hide it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
|
4ba544e2af |
refactor(theme): retire the --color-* shim — the sweep it promised, run
CI & Build / Python lint (push) Successful in 3s
CI & Build / Plugin hooks (push) Successful in 7s
CI & Build / integration (push) Successful in 17s
CI & Build / TypeScript typecheck (push) Successful in 34s
CI & Build / Python tests (push) Successful in 48s
CI & Build / Build & push image (push) Successful in 37s
#2533. theme.css claimed "removing this block is a rename sweep across the
components, tracked separately" — written in
|
||
|
|
bd60d679d9 |
refactor(theme): remove 184 var() fallbacks — every one was unreachable
CI & Build / Python lint (push) Successful in 3s
CI & Build / Plugin hooks (push) Successful in 16s
CI & Build / integration (push) Successful in 23s
CI & Build / TypeScript typecheck (push) Successful in 25s
CI & Build / Python tests (push) Successful in 57s
CI & Build / Build & push image (push) Successful in 43s
#2277 counted ~150 "raw colour literals bypassing the tokens". Measuring them told a different story: 184 sat in `var(--token, #fallback)` position, and a check against theme.css shows every one of those tokens IS declared. So the fallbacks could not render. Not drift — vestigial. They were also not this palette. The most common were Tailwind and Flat-UI defaults — #6366f1 indigo, #22c55e green, #f59e0b amber, #3b82f6 blue, #e74c3c and #27ae60 — a second, unsanctioned colour scheme sitting in the codebase looking like the app's colours to anyone reading it. Removing them is not tidying. #2319's lesson is that a fallback is WORSE than a missing token: a missing token renders as nothing and someone eventually notices, while a fallback renders something plausible forever. These 184 were one token rename away from silently repainting the app in Tailwind. The design token check would catch the rename — but the fallback is precisely the thing that would make it invisible if the check were ever bypassed. Literal count 152 -> 45, which matters beyond the number: a report that is mostly unreachable noise is one people stop reading, and then it stops working while still passing. What remains should be genuinely worth looking at. Done with a paren-aware transform, not a regex — `var(--x, rgba(0,0,0,.5))` nests parens and `[^)]+` would cut at the first one and leave `))` behind. Verified after: every changed line is a fallback strip and nothing else, and every var() reference still resolves. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01UaYUaouG9jjhATyuxCKrQs |
||
|
|
75d8e7ab49 | feat(rulebook): RulesView three-pane shell + child panes + rule editor |